CP6015 series CM6030/CM6040mfp series Cold Reset/Hard Disk Init.

by Tai Liu

CP6015 series CM6030/CM6040mfp series Cold Reset/Hard Disk Init.

Documents how to do a Cold reset for both series of Printers Documents how to do a Hard Disk Drive Initialization

What is it?

The service manual did not specify how to perform a Cold Reset or how to initialize a Hard Disk Drive. The instructions are below.

Note: Performing a cold reset may take some of the printer settings back to factory defaults. Some of these settings may include:

  •   Service ID/ Real Time Clock

  •   Configuration/Network Settings

  •   JDI settings

  •   Customer Paper Size settings

    How does it work?

    Initialize Hard Disk Drive (MFP series):

    1. Turn on the MFP and wait for the memory count. DURING the memory count press and hold the START key until the three status LEDs are illuminated.
    2. Release the START key.
    3. Press the "5" key one time, until "INITIALIZE DISK" is displayed, then press the "6" key one time. The MFP will initialize the disk and then continue with the boot sequence.

    Initialize Hard Disk Drive (Single Funtion series):

    1. Turn on the printer and wait for the memory count. DURING the memory count press and hold the MENU key until the three status LEDs are illuminated.
    2. Release the MENU key.

Page 1 of 2 white paper

3. Press the back arrow. The message INITIALIZE DISKS displays on the control panel. 3. Press the down arrow. The printer will initialize the disk and then continue with the boot sequence.

Cold Reset: (Both series)

1. Turn on the printer and wait for the memory count. DURING the memory count press and hold the "6" key until the three status LEDs are illuminated.
2. Release the "6" key.
3. Press the "3" key until "COLD RESET" is displayed, then press the "6" key one time. The printer will initialize the disk and then continue with the boot sequence. 

Recent articles