Cold reset for HP 9000 9040 9050 m9040 m9050 series

by Tai Liu

For HP 9000 9040 9050 M9040 M905 series MFP machines:

To perform a cold reset, set the display language, reset the maintenance kit, enable or disable embedded LAN

1 Turn off the printer.

2 Turn on the printer.

3 Wait until the printer begins counting memory.

4 Press and hold TICK (the 6 button on MFPs).

5 Continue to hold TICK until all three control panel lights illuminate, and then release TICK (the 6 button on MFPs).

6 Use DOWNARROW (the 9 button on MFPs) or UPARROW (the 3 button on MFPs) to scroll to the appropriate selection (COLD RESET, SELECT LANGUAGE, NEW MAINTENANCE KIT, or ENABLE/DISABLE EMBEDDED LAN).

7 Press TICK (the 6 button on MFPs).

The printer boot sequence is complete when READY appears on the control-panel.

For HP 9000 9040 9050 series laser printer(Printer only):

1 Turn off the printer.

2 Turn on the printer.

3 Wait until the printer begins counting memory.

4 Press and hold Check(Or select) button (the 6 button on MFPs).

5 Continue to hold TICK until all three control panel lights illuminate, and then release TICK (the 6 button on MFPs).

6 Use DOWNARROW (the 9 button on MFPs) or UPARROW (the 3 button on MFPs) to scroll to the appropriate selection (COLD RESET, SELECT LANGUAGE, NEW MAINTENANCE KIT, or ENABLE/DISABLE EMBEDDED LAN).

7 Press TICK (the 6 button on MFPs).

The printer boot sequence is complete when READY appears on the control-panel.

Recent articles